Show all of

Stools & seat cubes

Still 8 products in your filtering in Stools

Material guide: Stools

Materialbeispiel Massivholz

Solid wood

Natural material which is cut from trees. The individual lamellas can also be glued together to form sheets. Real wood veneer is made from very thin, cut wood lamellas, which can be glued together to form large sheets. Due to the natural growth of the tree, each piece of wood gets its special grain and may also contain knots. Thus, each piece of solid wood furniture is a unique and unmistakable.

Advantages: Stable, robust and durable: So you save costs in the long run! Large selection of wood types and natural or colored surface treatments for an individual design of your ambience! Easy to clean: Saves time when cleaning!

Care instructions: To keep the wood beautiful for a long time, we recommend cleaning with a damp, soft cloth. Then dry quickly.

Materialbeispiel Kunstleder

Imitation leather

Nowadays, upholstery covers made of artificial leather are almost indistinguishable from real leather. This cover material is natural fiber fabric or synthetic fibers, which are coated with a soft PVC surface.

Advantages: Durable and robust! Dimensionally stable & UV resistant! Easy to clean!

Care instructions: The easy-care and robust artificial leather can be easily cleaned when dirty. The surface only needs to be wiped. For heavier soiling, mild mild detergent or soapy water is also sufficient for cleaning. If necessary, wipe with a dry, non-fluffy cloth.

Materialbeispiel Samt

Fabric/Velvet

Our fabric upholstery covers are made of pure synthetic fibers. The cover material polyester is high quality synthetic fibers. This makes the fabric very resistant to tearing and abrasion, thus ideally suited for your catering business.

Advantages: Hard-wearing! Easy to clean! Long life!

Care instructions: To remove stains or dirt, we recommend a sponge moistened with soapy water. Also suitable is a cloth, e.g. cotton, with which you rub gently in one direction. To help the fabric dry faster, you can use a hair dryer.

Materialbeispiel Samt
Other materials for furniture

You will find an overview of all materials for indoor and outdoor use including advantages and care instructions in our material guides.

Quality standards for VEGA furniture

Catering furniture has to withstand a lot in everyday use! Our furniture quality standards ensure trouble-free use for the catering industry. Only if furniture meets these standards, it will be included in our assortment:

  • Material selection: The materials of our furniture go through rigorous testing to meet the tough requirements of the hospitality industry. In the process, they are tested in the testing laboratory for various situations that occur in everyday catering.
  • Tilt resistance: We test all our seating furniture for tilt resistance according to the EN 1022 standard, where the seating furniture is loaded with a certain load on the backrest. In doing so, the object must not tip over.
  • Load capacity: The maximum load capacity of our seating furniture is 160 kg per seat. In long-term tests, we ensure that the furniture can withstand this load permanently.
  • Fire protection: Our upholstered furniture meets the most important European fire protection standards required for hotel or restaurant equipment. This greatly minimizes the fire risk for furniture.
  • Durability: All our seating furniture is tested for durability according to the EN 1728 standard. The seat and backrest must withstand 100,000 load cycles. Thus, in 8 days in the test laboratory, up to five years of use in the catering industry is simulated.
  • Useful life: Our seating furniture is very durable and will last for many years under average use. This long service life is simulated and tested in the test laboratory.

Quality tests for upholstered furniture

Upholstered furniture is more delicate than furniture made of wood or other materials. Nevertheless, our upholstered furniture is suitable for the hospitality industry because it meets the most important ISO standards: Abrasion resistance (ISO 12947-2), Lightfastness (ISO 105 B02), Abrasion resistance (ISO 105 X12), Pilling resistance (ISO 12945-2).